7-159
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 7 Cisco Management Information Base
CISCO-SYSLOG-EXT-MIB
SEQUENCE { cseSyslogMessageFacility SyslogExFacility, cseSyslogMessageSeverity
SyslogSeverity }
cseSyslogMessageFacility OBJECT-TYPE
SYNTAX SyslogExFacility
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
System log message facility.
::= { cseSyslogMessageControlEntry 1 }
cseSyslogMessageSeverity OBJECT-TYPE
SYNTAX SyslogSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Minimum severity of the message that are generated by this Syslog message facility.
::= { cseSyslogMessageControlEntry 2 }
cseSyslogTerminalEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Indicate whether the Syslog messages should be sent to the terminals.
DEFVAL { false }
::= { cseSyslogConfigurationGroup 9 }
cseSyslogTerminalMsgSeverity OBJECT-TYPE
SYNTAX SyslogSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Minimum severity of the message that are sent to the terminals.
DEFVAL { debug }
::= { cseSyslogConfigurationGroup 10 }
cseSyslogLinecardEnable OBJECT-TYPE
SYNTAXTruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Indicate whether the Syslog messages should be generated at the line cards.
To Next Page
Loading...
Need help?
General