6-215
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Warning-Level Alarms
Routing List
SDL
SDI
Sys Log
Event Log
Parameter(s)
Error message(String)
Recommended Action
Verify whether the affected application is experiencing a problem. Contact the support organization for
the affected application if the problem persists and provide sequence number and error message for
further investigation.
DaTimeOut
The digit analysis component in Cisco Unified Communications Manager has timed out. This can occur
because Cisco Unified Communications Manager is busy and the resulting delay in processing request
and response messages caused the digit analysis component to time out.
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Warning
Recommended Action
In the Service Parameter Configuration window in Cisco Unified CM Administration, check the Cisco
CallManager service parameter, Digit Analysis Timer, to confirm that the default value is in use. Use
RTMT to monitor the system resources and correct any system issues that might be contributing to high
CPU utilization on Cisco Unified CM.
History
Cisco Unified Communications
Release Action
8.0(1) Severity changed from Error to Warning.
To Next Page
Loading...
Need help?
General