Cisco MCS-7825-H3-IPC1 User Manual

7-92
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 7 Cisco Management Information Base
CISCO-CCM-MIB
ccmSIPOutTransportProtocolType OBJECT-TYPE
SYNTAX CcmSIPTransportProtocolType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Specifies the transport protocol type used by Cisco Unified CM for setting up outgoing SIP call.
::= { ccmSIPDeviceEntry 9 }
ccmSIPOutPortNumber OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Specifies the port number used by Cisco Unified CM for setting up outgoing SIP call.
::= { ccmSIPDeviceEntry 10 }
ccmSIPDevInetAddressIPv4 OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS read-only
STATUS current
DESCRIPTION
This object identifies the last known primary IPv4 address of the SIP Trunk Device. This object
contains value zero if IPV4 address is not available.
::= { ccmSIPDeviceEntry 11 }
ccmSIPDevInetAddressIPv6 OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-only
STATUS current
DESCRIPTION
This object identifies the last known primary IPv6 address of the SIP Trunk Device. This object
contains value zero if IPV6 address is not available.
::= { ccmSIPDeviceEntry 12 }
Notifications Types
ccmMIBNotificationPrefix OBJECT IDENTIFIER
::= { ciscoCcmMIB 2 }
ccmMIBNotifications OBJECT IDENTIFIER
::= { ccmMIBNotificationPrefix 0 }
ccmCallManagerFailed NOTIFICATION-TYPE
OBJECTS {

Cisco MCS-7825-H3-IPC1 Specifications

General

Brand	Cisco
Model	MCS-7825-H3-IPC1
Category	Software
Language	English