6-75
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Alert-Level Alarms
Facility/Sub-Facility
CCM_TFTP-TFTP
Cisco Unified Serviceability Alarm Definition Catalog
System/TFTP
Severity
Alert (1)
Parameters
Error [Int] IPAddress [String] Port [Int]
Recommended Action
Verify that the port is not in use by other application. After stopping the TFTP server, at the command
line interface (CLI) on the TFTP server, execute the following command—show network status listen.
If the port number specified in this alarm is shown in this CLI command output, the port is being used.
Restart the Cisco Unified Communications Manager system, which may help to release the port. If the
problem persists, go to Cisco Unified Serviceability and enable Detailed level traces in the Trace
configuration window for the TFTP service and contact the Cisco Technical Assistance Center (TAC).
TestAlarmAlert
Testing alert alarm.
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
System/Test
Severity
Alert (1)
Recommended Action
None
TLSConnectionToIMEFailed
TLS Failure to IME service.
History
Cisco Unified Communications
Release Action
7.0(1) Name changed from kTFTPServerListenBindFailed.
To Next Page
Loading...
Need help?
General