6-320
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Notice-Level Alarms
Severity
Notice
Routing List
SDL
SDI
Sys Log
Event Log
Parameters
SIP Trunk Name(String)
Available remote peers for this SIP trunk(String)
Recommended Action
Notification purpose only; no action is required.
SMDICmdError
CMI receives an invalid incoming SMDI message.
There are two kinds of incoming messages that Cisco Unified Communications Manager can accept from
the voice messaging system; they are OP:MWI(SP)nnnnnnn!(D) and RMV:MWI(SP)nnnnnnn!(D)
(where:nnnnnnnnnn = station number (can be 7 or 10 digits), (D) = End Of Transmission, (SP) = space).
The first message activates the message waiting indicator (MWI). The second deactivates the message
waiting indicator. CMI triggers this alarm if the received MWI message does not have one of the
acceptable formats as described.
Cisco Unified Serviceability Alarm Definition Catalog
CMIAlarmCatalog/CMI
Severity
NOTICE
Routing List
Event Log
SDI
Parameter(s)
Invalid SMDI command(String)
History
Cisco Unified Communications
Release Action
8.0(1) Name changed from kSMDICmdError.
To Next Page
Loading...
Need help?
General