6-63
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Alert-Level Alarms
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Alert
Parameters
Cisco Unified Communications Manager Overall Initialization Time (in minutes) [Int]
Recommended Action
Try increasing the value of the Cisco CallManager service parameter, System Initialization Timer, in the
Service Parameters Configuration window in Cisco Unified CM Administration. Use RTMT to discover
the number of devices and number of users in the system and evaluate whether the numbers seem
accurate. Try increasing the value of the Cisco CallManager service parameter, System Initialization
Timer, in the Service Parameters Configuration window in Cisco Unified CM Administration. If
increasing the time in the System Initialization Timer service parameter does not correct this issue,
contact the Cisco Technical Assistance Center (TAC).
ConfigThreadChangeNotifyServerInstanceFailed
Failed to allocate resources to handle configuration change notification from database. This usually
indicates a lack of memory when there is a system issue such as running out of resources.
Facility/Sub-Facility
CCM_TFTP-TFTP
Cisco Unified Serviceability Alarm Definition Catalog
System/TFTP
History
Cisco Unified Communications
Release Action
8.0(1)
• Name changed from CUCMOverallInitTimeExceeded.
• Severity changed from Error to Alert.
History
Cisco Unified Communications
Release Action
7.0(1) Name changed from
kConfigThreadChangeNotifyServerInstanceFailed
8.0(1) Severity changed from Error to Alert.
To Next Page
Loading...
Need help?
General