6-281
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Warning-Level Alarms
Parameters
Message(String)
Recommended Action
Perform sync manually or wait till next scheduled next sync.
SIPStopped
Cisco CallManager is not ready to handle calls for the indicated SIP device. Possible reasons could be
internal database error, the SIP device is not activated on this node, the SIP device failed to register or
the SIP device was deleted from admin page.
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Warning (4)
Parameters
Device Name. [String] IP Address [String] Device type. [Optional] [Enum]Device description
[Optional]. [String] Incoming Port Number. [UInt] Outgoing Port Number. [UInt] Incoming Transport
Type [Enum]Outgoing Transport Type [Enum]IPV6Address [Optional]. [String]
Enum Definitions for DeviceType
131—SIP_TRUNK
Enum Definitions for InTransportType
History
Cisco Unified Communications
Release Action
8.0(1) Enum Definitions for InTransportType and OutTransportType are
updated.
Recommended Action changed.
7.0(1) IPV6Address parameter added.
Code Definition
1TCP
2UDP
3 TLS
4TCP/UDP
To Next Page
Loading...
Need help?
General