3-26
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 3 Managing and Monitoring the Health of Cisco Unified Communications Manager Systems
Recovery, Hardware Migration, and Backup/Restore
• *cma*[?????]:*
• *hp*[???]:*
• *hp*[????]:*
• *hp*[?????]:*
You can search for the above patterns to find hardware failure events in syslog.
For information on alarm configuration, refer to the Alarm Configuration section of the Cisco Unified
Serviceability Administration Guide at
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/5_1_3/ccmsrva/saalarm.html
RTMT Alerts as Syslog Messages and Traps
RTMT alerts can be sent to a remote syslog server. To send to a local and remote syslog server, configure
the AMC alarm in Cisco Unified Serviceability. Figure 3-12 shows the window.
Figure 3-12 Local and Remote Syslog Configuration
Recovery, Hardware Migration, and Backup/Restore
The following topics are described in this section:
• Backup/Restore, page 3-26
• Platform Monitoring, page 3-27
Backup/Restore
Cisco provides the following backup/restore utilities:
• Cisco Unified CM Release 4.x uses the Backup and Restore System (BARS) application
• Cisco Unified CM Release 5.x uses the Disaster Recovery Framework (DRF)
• Cisco Unified CM Release 6.x uses the Disaster Recovery System (DRS), essentially a renaming of
DRF above
To Next Page
Loading...
Need help?
General