CHAPTER
7-1
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
7
Cisco Management Information Base
This chapter describes the Management Information Base (MIB) text files that are supported by Cisco
Unified Communications Manager (Cisco Unified CM) and are used with Simple Network Management
Protocol (SNMP). The chapter contains the following sections:
• CISCO-CCM-MIB, page 7-1
• CISCO-CCM-CAPABILITY, page 7-121
• CISCO-CDP-MIB, page 7-127
• CISCO-SYSLOG-MIB, page 7-144
• CISCO-SYSLOG-EXT-MIB, page 7-152
CISCO-CCM-MIB
Note This is a reformatted version of CISCO-CCM-MIB. Download and compile all of the MIBs in this
section from http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2.
This MIB manages the Cisco Unified Communications Manager (Cisco Unified CM) application
running with a Cisco Communication Network (CCN) system. Cisco Unified CM is an IP-PBX that
controls the call processing of a VoIP network.
A CCN system comprises multiple regions, with each region consisting of several Cisco Unified CM
groups with multiple Cisco Unified CM servers. The MIB can be used by the Cisco Unified CM
application, Cisco Unified CM Administration, to present provision and statistics information.
The following terminology applies to this MIB:
• SCCP—Skinny Client Control Protocol
• SIP—Session Initiation Protocol
• TLS—Transport Layer Security
• MGCP—Media Gateway Control Protocol
Before you can compile CISCO-CCM-MIB, you need to download and compile the MIBs listed below
in the order listed.
1. SNMPv2-SMI
To Next Page
Loading...
Need help?
General