6-193
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Error-Level Alarms
SDI
Sys Log
Event Log
Parameters
Device Name(String)
Script Name(String)
Script Function(String)
Script Type(String)
Error Code(Enum)
Error Code Text(String)
Error Message(String)
Configured Action(String)
Resulting Action(String)
In Use Memory(UInt)
Memory Threshold(UInt)
In Use Lua Instructions(UInt)
Lua Instruction Threshold(UInt)
Enum Definitions - Reason Code
Recommended Action
1. Examine SDI trace files for details regarding the error such as function calls and the call ID. This
will help you to troubleshoot the error.
2. Examine the script for syntax or logic errors; for scripts provided by Cisco, contact the Cisco
Technical Assistance Center (TAC). If the error was due to a resource issue, the
SIPNormalizationResourceWarning alarm will also be issued. Check the
SIPNormalizationResourceWarning alarm for additional information and recommended actions.
SIPTrunkOOS
All remote peers are out of service and unable to handle calls for this SIP trunk.
Value Definition
1 LoadError —The script failed to load either due to a syntax error in the
script or a resource error; check the Recommended Actions for instruc-
tions.
2 InitializationError—The script encountered a failure while initializing
either due to a syntax error in the script or a resource error; check the
Recommended Actions for instructions.
3 ExecutionError—The script encountered a failure during execution;
check the Recommended Actions for instructions.
4 InternalError—The system encountered an unexpected condition
during execution; check the Recommended Actions for instructions.
To Next Page
Loading...
Need help?
General