6-389
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Informational-Level Alarms
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Informational (6)
Parameters
Device Name [String] Packet Capture Mode [String] Packet Capture Duration [String]
Recommended Action
None
PublicationRunCompleted
Completion of publication of published DID patterns.
This alarm is generated when Unified CM completes a publication of the DID patterns into the IME
network.
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
INFORMATIONAL
Recommended Action
This alarm is provided for historic and informational purposes. It can be used to give you feedback that
the system is working and is correctly publishing numbers into the IME network. It can also be used for
troubleshooting. If some of the publishes fail for some reason, the alarm will contain a list of those
numbers which were not published. If your users are receiving calls, and they are not over IP but you
think they ought to be, you can check the history of these alarms to see if the number failed to be
published into the network.
Routing List
SDL
SDI
Sys Log
Event Log
Parameter(s)
Start time(String)
End time(String)
DID count(UInt)
Failed DID count(UInt)
To Next Page
Loading...
Need help?
General