2-23
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 2 New and Changed Information
Cisco Unified Communications Manager, Release 8.5(1)
• To display trunks for a particular trunk type in the List of Trunks box, click the icon next to Trunk
Types in the column on the left side of the window. The tree structure expands, and a list of trunk
types displays. Choose a trunk type from the list, and the trunk name displays in the List of Trunks
box.
Note The List of Trunks box will list up to 200 trunks that are configured for the chosen trunk type.
Note You can generate the trunk utilization reports for route groups, route lists, and route patterns that
are connected through trunks.
Step 4 Choose a trunk type from the list.
The trunk name displays in the List of Trunks box.
Note The List of Trunks box displays up to 200 trunks that are configured for the chosen trunk type.
Step 5 In the List of Trunks box, choose the trunks that you want to include in the report.
Note You can generate a report for up to five trunks at a time.
Step 6 To move the chosen trunk to the list of Selected Trunks box, click the down arrow.
The trunk(s) that you chose displays in the Selected Trunks box.
Step 7 If you chose Generate New Report, enter the date range of the period for which you want to see call
information.
Note Ensure the date and time range does not exceed one month.
Step 8 If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area.
If you want the report in PDF format, choose PDF (portable document format) in the Report Format area.
Step 9 Click the View Report button.
The report displays.
Step 10 If you want to mail the report, click the Send Report button.
Cisco Dialed Number Analyzer Server
The Cisco Dialed Number Analyzer Server service along with the Cisco Dialed Number Analyzer
service supports Cisco Unified Communications Manager Dialed Number Analyzer. This service needs
to be activated only on the node that is dedicated specifically for the Cisco Dialed Number Analyzer
service.
This service can be activated by choosing Tools > Service Activation and choosing Tools > Dialed
Number Analyzer Server, from the Serviceability UI.
To Next Page
Loading...
Need help?
General