6-20
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Preconfigured System Alarm Notifications
CiscoDRFFailure
This alert occurs when the DRF backup or restore process encounters errors.
Table 6-4 provides the default configuration for the CiscoDRFFailure RTMT Alert.
Enable/Disable this alert
on the following servers
Enabled on listed servers
Threshold Number of AuthenticationFailed events exceeds:
1 time in the last 1 minute
Duration Trigger alert immediately
Frequency Trigger alert on every poll
Schedule 24 hours daily
Enable e-mail Selected
Trigger Alert Action Default
Table 6-3 Default Configuration for the AuthenticationFailed RTMT Alert (continued)
Value Default Configuration
Table 6-4 Default Configuration for the CiscoDRFFailure RTMT Alert
Value Default Configuration
Enable Alert Selected
Severity Critical
Enable/Disable this
alert on the
following servers
Enabled on listed servers
Threshold Trigger alert when following condition met:
CiscoDRFFailure event generated
Duration Trigger alert immediately
Frequency Trigger alert on every poll
Schedule 24 hours daily
Enable E-mail Selected
Trigger Alert Action Default