9-19
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 9 Vendor-Specific Management Information Base
Hewlett Packard MIBs
Hewlett Packard MIBs
Table 9-12 provides the list of Hewlett Packard MIBs.
Thermal IBM-SYSTEM-LMSENSOR-MIB::ibmSystemTem
peratureSensorStatus (also see
ibmSystemTemperatureSensorKeyIndex)
The Status property is a string indicating the
current status of the object. Various
operational and non-operational statuses can
be defined. Operational statuses are OK,
Degraded and Pred Fail. Pred Fail indicates
that an element may be functioning properly
but predicting a failure in the near future. An
example is a SMART-enabled hard drive.
Non-operational statuses can also be
specified. These are Error, Starting, Stopping
and Service. The latter, Service, could apply
during mirror-resilvering of a disk, reload of
a user permissions list, or other
administrative work. Not all such work is
on-line, yet the managed element is neither
OK nor in one of the other states. OK =
Normal; Error = Critical
Network Interface Card IBM-SYSTEM-NETWORK-MIB::ibmSystemLogi
calNetworkAdapterStatus (also see
ibmSystemLogicalNetworkAdapterKeyIndex)
The online status of the adapter.
Logical Drive IBM-SYSTEM-TRAP-MIB::ibmSystemRaidLogica
lDriveStatus (also see
ibmSystemRaidLogicalDriveKeyIndex)
The status of the logical drive
Physical Drive IBM-SYSTEM-TRAP-MIB::ibmSystemRaidDiskD
riveStatus & ibmSystemRaidControllerStatus (also
see ibmSystemRaidDiskDriveKeyIndex &
ibmSystemRaidControllerKeyIndex)
Table 9-11 IBM Hardware Status Messages, MIBs and Objects Names, and Object Responses (continued)
Cisco Unified CM Release 6.x
MCS-78xx Status MIBS and Object Names Object Responses
Table 9-12 HP MIBs
MIB OID Function
Supported for browsing and system traps
CPQSTDEQ-MIB 1.3.6.1.4.1.232.1 Provides hardware component configuration
data
CPQSINFO-MIB 1.3.6.1.4.1.232.2 Provides hardware component asset data
CPQIDA-MIB 1.3.6.1.4.1.232.3 Provides RAID status/events
CPQHLTH-MIB 1.3.6.1.4.1.232.6 Provides hardware components status/events
CPQSTSYS-MIB 1.3.6.1.4.1.232.8 Provides storage (disk) systems status/events
CPQSM2-MIB 1.3.6.1.4.1.232.9 Provides iLO status/events
To Next Page
Loading...
Need help?
General