8-30
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 8 Industry-Standard Management Information Base
RFC1213-MIB (MIB-II)
egp OBJECT IDENTIFIER ::= { mib-2 8 }
Historical
cmot OBJECT IDENTIFIER ::= { mib-2 9 }
transmission OBJECT IDENTIFIER ::= { mib-2 10 }
snmp OBJECT IDENTIFIER ::= { mib-2 11 }
System Group
Implementation of the system group is mandatory for all systems. If an agent is not configured to have
a value for any of these variables, a string of length 0 is returned.
sysDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
A textual description of the entity. This value should include the full name and version identification
of the system's hardware type, software operating-system, and networking software. It is mandatory
that this only contain printable ASCII characters.
::= { system 1 }
sysObjectID OBJECT-TYPE
SYNTAX Object Identifier
ACCESS read-only
STATUS mandatory
DESCRIPTION
The vendor authoritative identification of the network management subsystem contained in the
entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy
and unambiguous means for determining “what kind of box” is being managed. For example, if
vendor “Flintstones, Inc.” was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier
1.3.6.1.4.1.4242.1.1 to its “Fred Router”.
::= { system 2 }
sysUpTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
The time (in hundredths of a second) since the network management portion of the system was last
re-initialized.
::= { system 3 }
To Next Page
Loading...
Need help?
General