Cisco MCS-7825-H3-IPC1 - Definitions; Object Identifiers; Revisions; Textual Conventions

7-145
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 7 Cisco Management Information Base
CISCO-SYSLOG-MIB
• Basic Syslog Objects, page 7-146
• Syslog Message History Table, page 7-147
• Notifications, page 7-149
• Conformance Information, page 7-150
• Compliance Statements, page 7-150
• Units of Conformance, page 7-150
Revisions
Table 7-7 lists the revisions to the MIB beginning with the latest revision.
Definitions
The following definitions are imported for CISCO-SYSLOG-MIB:
• MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Integer32, Counter32
• From SNMPv2-SMI—TEXTUAL-CONVENTION, DisplayString, TimeStamp, TruthValue
• From SNMPv2-TC—MODULE-COMPLIANCE, OBJECT-GROUP
• From SNMPv2-CONF—ciscoMgmt
• From CISCO-SMI—ciscoSyslogMIB MODULE-IDENTITY
ciscoSyslogMIBObjects OBJECT IDENTIFIER ::= { ciscoSyslogMIB 1 }
Object Identifiers
clogBasicOBJECT IDENTIFIER ::= { ciscoSyslogMIBObjects 1 }
clogHistoryOBJECT IDENTIFIER ::= { ciscoSyslogMIBObjects 2 }
Textual Conventions
SyslogSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
The severity of a syslog message. The enumeration values are equal to the values that syslog uses
+ 1. For example, with syslog, emergency=0.
SYNTAX INTEGER { emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7),
debug(8) }
Table 7-7 History of Revisions
Date Action Description
08-07-1995 Initial Version The MIB module describes how to store the system messages generated
by the Cisco IOS software. ::= { ciscoMgmt 41 }