Cisco MCS-7825-H3-IPC1 - Cmtotalinitializationstatetime; Connectiontopdpinservice

6-338
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Informational-Level Alarms
Parameter(s)
Service Priority(String)
Recommended Action
Informational purpose only; no action is required.
CMTotalInitializationStateTime
Indicates the amount of time required to complete the specified total system initialization state.
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Informational (6)
Parameters
Total Initialization Time [String] Total Initialization Time in Milliseconds [UInt]
Recommended Action
None
ConnectionToPDPInService
A connection was successfully established between Cisco Unified Communications Manager (Unified
CM) and the policy decision point (PDP).
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Informational(6)
Routing List
SDL
SDI
Sys Log
Event Log
Parameters
Policy Decision Point(String)