6-21
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Preconfigured System Alarm Notifications
CoreDumpFileFound
This alert occurs when the CoreDumpFileFound event gets generated. This indicates that a core dump
file exists in the system.
Table 6-5 provides the default configuration for the CoreDumpFileFound RTMT Alert.
CpuPegging
CPU usage gets monitored based on configured thresholds. If the usage goes above the configured
threshold, this alert gets generated.
Table 6-6 provides the default configuration for the CpuPegging RTMT Alert.
Table 6-5 Default Configuration for the CoreDumpFileFound RTMT Alert
Value Default Configuration
Enable Alert Selected
Severity Critical
Enable/Disable this
alert on the
following servers
Enabled on listed servers
Threshold Trigger alert when following condition met:
CoreDumpFileFound event generated
Duration Trigger alert immediately
Frequency Trigger alert on every poll
Schedule 24 hours daily
Trace download
Parameters
Not Selected
Enable E-mail Selected
Trigger Alert Action Default
Table 6-6 Default Configuration for the CpuPegging RTMT Alert
Value Default Configuration
Enable Alert Selected
Severity Critical
Enable/Disable this
alert on the
following servers
Enabled on listed servers
Threshold Trigger alert when following condition met:
99%
Duration Trigger alert only when value remains constantly below or over threshold for 60
seconds
Frequency Trigger up to 3 alerts within 30 minutes
To Next Page
Loading...
Need help?
General