Cisco MCS-7825-H3-IPC1 - Serialportsetstatuserror

6-187
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Error-Level Alarms
Cisco Unified Serviceability Alarm Definition Catalog
CMIAlarmCatalog/CMI
Severity
ERROR
Routing List
Event Log
SDI
Parameter(s)
Serial Port Getting Status Error(String)
Recommended Action
Make sure that the cable connecting the USB0 port and voice messaging system is firmly connected.
SerialPortSetStatusError
When CMI tries to set the status of serial port, the operating system returns an error.
CMI triggers this alarm when it cannot set the status of the serial port. An inability to receive the serial
port status information can be caused by a loose or disconnected USB cable.
Cisco Unified Serviceability Alarm Definition Catalog
CMIAlarmCatalog/CMI
Severity
ERROR
Routing List
Event Log
SDI
History
Cisco Unified Communications
Release Action
8.0(1) Name changed from kSerialPortGetStatusError.
History
Cisco Unified Communications
Release Action
8.0(1) Name changed from kSerialPortSetStatusError.