7-146
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 7 Cisco Management Information Base
CISCO-SYSLOG-MIB
Basic Syslog Objects
clogNotificationsSent OBJECT-TYPE
SYNTAX Counter32
UNITS notifications
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The number of clogMessageGenerated notifications that have been sent. This number may include
notifications that were prevented from being transmitted due to reasons such as resource limitations
and/or non-connectivity. If one is receiving notifications, one can periodically poll this object to
determine if any notifications were missed. If so, a poll of the clogHistoryTable might be
appropriate.
::= { clogBasic 1 }
clogNotificationsEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Indicates whether clogMessageGenerated notifications will or will not be sent when a syslog
message is generated by the device. Disabling notifications does not prevent syslog messages from
being added to the clogHistoryTable.
DEFVAL { false }
::= { clogBasic 2 }
clogMaxSeverity OBJECT-TYPE
SYNTAX SyslogSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Indicates which syslog severity levels will be processed. Any syslog message with a severity value
greater than this value will be ignored by the agent.
Note Severity numeric values increase as their severity decreases, e.g. error(4) is more severe than debug(8).
DEFVAL { warning }
::= { clogBasic 3 }
clogMsgIgnores OBJECT-TYPE
SYNTAX Counter32
UNITS messages
MAX-ACCESS read-only
To Next Page
Loading...
Need help?
General