7-149
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 7 Cisco Management Information Base
CISCO-SYSLOG-MIB
STATUS current
DESCRIPTION
The severity of the message.
::= { clogHistoryEntry 3 }
clogHistMsgName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
A textual identification for the message type. A facility name in conjunction with a message name
uniquely identifies a message type.
::= { clogHistoryEntry 4 }
clogHistMsgText OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The text of the message. If the text of the message exceeds 255 bytes, the message will be truncated
to 254 bytes and a '*' character will be appended indicating that the message has been truncated.
::= { clogHistoryEntry 5 }
clogHistTimestamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The value of sysUpTime when this message was generated.
::= { clogHistoryEntry 6 }
Notifications
ciscoSyslogMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoSyslogMIB 2 }
ciscoSyslogMIBNotifications OBJECT IDENTIFIER ::= { ciscoSyslogMIBNotificationPrefix 0 }
clogMessageGenerated NOTIFICATION-TYPE
OBJECTS {clogHistFacility, clogHistSeverity, clogHistMsgName, clogHistMsgText,
clogHistTimestamp }
STATUS current
DESCRIPTION
When a syslog message is generated by the device a clogMessageGenerated notification is sent. The
sending of these notifications can be enabled/disabled via the clogNotificationsEnabled object.
To Next Page
Loading...
Need help?
General