Cisco MCS-7825-H3-IPC1 - Csesyslogservertable

7-156
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 7 Cisco Management Information Base
CISCO-SYSLOG-EXT-MIB
::= { cseSyslogConfigurationGroup 4 }
cseSyslogFileLoggingDisable OBJECT-TYPE
SYNTAX Integer { true (1), noOp (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Indicates whether the Syslog messages should be sent to the file indicated by
cseSyslogLogFileName. Once this object is set to 'true', the Syslog messages are no longer sent to
the file. The value of 'cseSyslogLogFileName' is set to zero length string. To restart the file logging,
the cseSyslogLogFileName should be set to a valid file name.
No action is taken if this object is set to 'noOp'. The value of the object when read is always 'noOp'.
::= { cseSyslogConfigurationGroup 5 }
cseSyslogServerTableMaxEntries OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The maximum number of entries that the agent supports in the cseSyslogServerTable.
::= { cseSyslogConfigurationGroup 6 }
cseSyslogServerTable
cseSyslogServerTable OBJECT-TYPE
SYNTAX Sequence of CseSyslogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
This table contains all the Syslog servers which are configured.
::= { cseSyslogConfigurationGroup 7 }
cseSyslogServerEntry OBJECT-TYPE
SYNTAX CseSyslogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
An entry containing information about a Syslog server.
INDEX { cseSyslogServerIndex}
::= { cseSyslogServerTable 1 }
CseSyslogServerEntry ::=