Cisco MCS-7825-H3-IPC1 - Page 799

7-157
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 7 Cisco Management Information Base
CISCO-SYSLOG-EXT-MIB
SEQUENCE { cseSyslogServerIndex Unsigned32, cseSyslogServerAddressType
InetAddressType, cseSyslogServerAddress InetAddress, cseSyslogServerMsgSeverity
SyslogSeverity, cseSyslogServerStatus RowStatus, cseSyslogServerFacility SyslogFacility }
cseSyslogServerIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
An arbitrary integer value, greater than zero, and less than and equal to
cseSyslogServerTableMaxEntries, which identifies a Syslog server row in this table.
::= { cseSyslogServerEntry 1 }
cseSyslogServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
The type of the address of the Syslog server which is given by the corresponding value of
cseSyslogServerAddress.
::= { cseSyslogServerEntry 2 }
cseSyslogServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
The address of the Syslog server.
::= { cseSyslogServerEntry 3 }
cseSyslogServerMsgSeverity OBJECT-TYPE
SYNTAX SyslogSeverity
MAX-ACCESS read-create
STATUS current
DESCRIPTION
Minimum severity of the message that are sent to this Syslog server.
DEFVAL {debug}
::= { cseSyslogServerEntry 4 }
cseSyslogServerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION