6-74
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Alert-Level Alarms
Severity
ALERT
Routing List
Event Log
SDI
Parameter(s)
Illegal Stop Bit(String)
Recommended Action
Verify that the Cisco Messaging Interface service parameter Stop Bits is set to a valid (allowable) value.
TFTPServerListenSetSockOptFailed
Failed to increase the size of the network buffer for receiving file requests. This usually indicates a lack
of memory when there is a system issue such as running out of resources.
Facility/Sub-Facility
CCM_TFTP-TFTP
Cisco Unified Serviceability Alarm Definition Catalog
System/TFTP
Severity
Alert (1)
Parameters
Error [Int] IPAddress [String] Port [Int]
Recommended Action
Use RTMT to monitor the system memory resources and consumption and correct any system issues that
might be contributing to a reduced amount of system resources.
TFTPServerListenBindFailed
Fail to connect to the network port through which file requests are received. This usually happens if the
network port is being used by other applications on the system or if the port was not closed properly in
the last execution of TFTP server.
History
Cisco Unified Communications
Release Action
7.0(1) Name changed from kTFTPServerListenSetSockOptFailed.
To Next Page
Loading...
Need help?
General