5-5
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 5 Cisco Unified Real-Time Monitoring Tool Tracing, PerfMon Counters, and Alerts
Performance Monitoring in RTMT
PerfMon Objects and Counters for Cisco Unified Communications Manager
This section provides information on Cisco Unified Communications Manager PerfMon objects and
counters.
Cisco Analog Access
The Cisco Analog Access object provides information about registered Cisco Analog Access gateways.
Table 5-3 contains information about Cisco Analog Access counters.
Cisco Annunciator Device
The Cisco Annunciator Device object provides information about registered Cisco annunciator devices.
Table 5-4 contains information about Cisco Annunciator counters.
Cisco CallManager
The Cisco CallManager object provides information about calls, applications, and devices that are
registered with the Cisco Unified Communications Manager. Table 5-5 contains information about
Cisco CallManager counters.
Table 5-3 Cisco Analog Access
Counters Counter Description
OutboundBusyAttempts This counter represents the total number of times that Cisco Unified
Communications Manager attempts a call through the analog access gateway
when all ports were busy.
PortsActive This counter represents the number of ports that are currently in use (active). A
port appears active when a call is in progress on that port.
PortsOutOfService This counter represents the number of ports that are currently out of service.
Counter applies only to loop-start and ground-start trunks.
Table 5-4 Cisco Annunciator Device
Counters Counter Description
OutOfResources This counter represents the total number of times that Cisco Unified
Communications Manager attempted to allocate an annunciator resource from an
annunciator device and failed; for example, because all resources were already in
use.
ResourceActive This counter represents the total number of annunciator resources that are
currently active (in use) for an annunciator device.
ResourceAvailable This counter represents the total number of resources that are not active and are
still available to be used at the current time for the annunciator device.
ResourceTotal This counter represents the total number of annunciator resources that are
configured for an annunciator device.
To Next Page
Loading...
Need help?
General