Cisco MCS-7825-H3-IPC1 User Manual

7-158
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 7 Cisco Management Information Base
CISCO-SYSLOG-EXT-MIB
The status of this row. A row can not become 'active' until the values for
cseSyslogServerAddressType and cseSyslogServerAddress in that row have both been set. A row
cannot be created until corresponding instances of following objects are instantiated.
– cseSyslogServerAddressType
– cseSyslogServerAddress
The following objects may not be modified while the value of this object is active (1):
– cseSyslogServerAddressType
– cseSyslogServerAddress.
::= { cseSyslogServerEntry 5 }
cseSyslogServerFacility OBJECT-TYPE
SYNTAX SyslogFacility
MAX-ACCESS read-create
STATUS current
DESCRIPTION
The facility to be used when sending Syslog messages to this server.
DEFVAL {local7}
::= { cseSyslogServerEntry 6 }
cseSyslogMessageControlTable
cseSyslogMessageControlTable OBJECT-TYPE
SYNTAX Sequence of CseSyslogMessageControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
This table contains the information about what system log messages should be sent to Syslog host,
console, log file, and/or logged into the internal buffer.
::= { cseSyslogConfigurationGroup 8 }
cseSyslogMessageControlEntry OBJECT-TYPE
SYNTAX cseSyslogMessageControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
A system log message control table entry. Each entry specifies a severity for a particular 'facility'
which generates Syslog messages. Any generated message which is at least as severe as the
specified severity will be logged.
INDEX { cseSyslogMessageFacility }
::= { cseSyslogMessageControlTable 1 }
CseSyslogMessageControlEntry ::=

Cisco MCS-7825-H3-IPC1 Specifications

General

Brand	Cisco
Model	MCS-7825-H3-IPC1
Category	Software
Language	English