9-18
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 9 Vendor-Specific Management Information Base
IBM MIBs
IBM Status Messages
Table 9-11 provides the IBM hardware status messages.
Table 9-11 IBM Hardware Status Messages, MIBs and Objects Names, and Object Responses
Cisco Unified CM Release 6.x
MCS-78xx Status MIBS and Object Names Object Responses
System Fan IBM-SYSTEM-LMSENSOR-MIB::ibmSystem
TachometerStatus (also see
ibmSystemTachometerKeyIndex)
This is a string indicating the current status
of the object. Various operational and
non-operational statuses can be defined.
Operational statuses are OK, Degraded and
Pred Fail. Pred Fail indicates that an element
may be functioning properly but predicting a
failure in the near future. An example is a
SMART-enabled hard drive.
Non-operational statuses are Error, Starting,
Stopping and Service. Service can apply
during mirror-resilvering of a disk, reload of
a user permissions list, or other
administrative work.
Not all such work is on-line, yet the managed
element is neither OK nor in one of the other
states.
OK = Normal; Error = Critical
Voltage Sensor IBM-SYSTEM-LMSENSOR-MIB::ibmSystem
VoltageSensorStatus (also see
ibmSystemVoltageSensorKeyIndex)
This is a string indicating the current status
of the object. Various operational and
non-operational statuses can be defined.
Operational statuses are OK, Degraded and
Pred Fail. Pred Fail indicates that an element
may be functioning properly but predicting a
failure in the near future. An example is a
SMART-enabled hard drive.
Non-operational statuses are Error, Starting,
Stopping and Service. Service can apply
during mirror-resilvering of a disk, reload of
a user permissions list, or other
administrative work. Not all such work is
on-line, yet the managed element is neither
OK nor in one of the other states.
OK = Normal; Error = Critical
To Next Page
Loading...
Need help?
General