6-317
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Notice-Level Alarms
Recommended Action
This alarm serves as a notification of the script closure, if the alarm has occurred due to a SIP trunk
maintenance window or any other expected reason for the script to close. If this alarm is unexpected,
check for an occurrence of the SIPNormalizationScriptError alarm and refer to the specific action based
on the reason code identified in the SIPNormalizationScriptError alarm.
SIPNormalizationAutoResetDisabled
An error occurred repeatedly and Cisco Unified CM disabled the script.
The script failed due to execution errors that occurred three times within a 10 minute period. As a result,
the normalization script for the indicated SIP device has been disabled. Cisco Unified CM do not
attempts to automatically reset either the script or the device for the purpose of recovering the script.
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Notice
Routing List
SDL
SDI
Sys Log
Event Log
Parameters
Device Name(String)
Script Name(String)
Script Type(String)
Reason Code(Enum)
Reason Text(String)
Additional Information(String)
History
Cisco Unified Communications
Release Action
8.5(1)
• New alarm for this release.
To Next Page
Loading...
Need help?
General