6-316
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Notice-Level Alarms
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Notice
Routing List
SDL
SDI
Sys Log
Event Log
Parameters
Device Name(String)
Script Name(String)
Reason Code(Enum)
Reason Text(String)
Additional Information(String)
Enum Definitions - Reason Code
History
Cisco Unified Communications
Release Action
8.5(1)
• New alarm for this release.
Value Definition
1 DeviceResetManually—The associated device is reset manually using
Cisco Unified CM Administration.
2 DeviceResetAutomatically—The associated device is reset automati-
cally; the reset was triggered by an execution error in the script.
3 DeviceDeleted—The associated device is manually deleted in Cisco
Unified CM Administration.
4 ScriptDisassociated—A configuration change occurred in Cisco
Unified CM Administration and the script is no longer associated with
the device.
5 ScriptInfoChanged—A change in the script logic occurred or a change
to one or more fields on the SIP Normalization Script Configuration
window in Cisco Unified CM Administration occurred.
6 ScriptError—An error occurred in the script; check for the occurrence
of SIPNormalizationScriptError alarm and perform the recommended
actions described to correct the script error.
To Next Page
Loading...
Need help?
General