6-369
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Informational-Level Alarms
Recommended Action
Informational purposes only; no action is required.
EndPointRestartInitiated
Device restart initiated or Apply Config initiated on the specified device.
This alarm occurs when a device is restarted via the Restart button in Cisco Unified CM Administration
window or when a system administrator presses the Apply Config button for a device that does not
support conditional restart. Restart causes the device to unregister, receive an updated configuration file,
and reregister with Cisco Unified Communications Manager (Unified CM) without shutting down. A
device can be restarted only when it is registered with Unified CM.
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
INFORMATIONAL
437 CISCO_7975
446 CISCO_3911
468 CISCO_UNIFIED_MOBILE_COMMUNICATOR
478 CISCO_TELEPRESENCE_1000
479 CISCO_TELEPRESENCE_3000
480 CISCO_TELEPRESENCE_3200
481 CISCO_TELEPRESENCE_500
484 CISCO_7925
493 CISCO_9971
495 CISCO_6921
496 CISCO_6941
497 CISCO_6961
20000 CISCO_7905
30002 CISCO_7920
30006 CISCO_7970
30007 CISCO_7912
30008 CISCO_7902
30016 CISCO_IP_COMMUNICATOR
30018 CISCO_7961
30019 CISCO_7936
30035 I P_STE
Value Definition
To Next Page
Loading...
Need help?
General