EasyManuals Logo

Cisco MCS-7825-H3-IPC1 User Manual

Cisco MCS-7825-H3-IPC1
974 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #461 background imageLoading...
Page #461 background image
6-227
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Warning-Level Alarms
that is attempting to auto-register if auto-registration has been intentionally disabled. Check the device
indicated in this alarm and confirm that the device registration details in Cisco Unified CM
Administration are accurate. Also, refer to the reason code definitions for recommended actions. No
action is required if this event was issued as a result of a normal device rehome.
DeviceUnregistered
A device that has previously registered with Cisco CallManager has unregistered. In cases of normal
unregistration with reason code 'CallManagerReset', 'CallManagerRestart', or 'DeviceInitiatedReset', the
severity of this alarm is lowered to INFORMATIONAL. A device can unregister for many reasons, both
intentional, such as manually resetting the device after a configuration change, or unintentional, such as
loss of network connectivity. Other causes for this alarm could include a phone being registered to a
secondary node and then the primary node come back online, causing the phone to rehome to the primary
Unified CM node or lack of a KeepAlive being returned from the Unified CM node to which this device
was registered. Unregistration also occurs if Unified CM receives a duplicate registration request for this
same device.
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Warning
Parameters
Device name. [String]
Device MAC address [Optional]. [String]
Device IP address [Optional]. [String]
Protocol. [String]
Device type. [Optional] [Enum]
History
Cisco Unified Communications
Release Action
8.0(1)
• Severity changed from Error to Warning.
• Following information is updated:
–
Enum Definitions for DeviceType
–
Enum Definition
–
Enum Definitions for IPAddrAttributes
–
Enum Definitions for IPV6AddrAttributes
7.1 Parameters added: IPV6Address,IPAddrAttributes, and
IPV6AddrAttributes.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco MCS-7825-H3-IPC1 and is the answer not in the manual?

Cisco MCS-7825-H3-IPC1 Specifications

General IconGeneral
BrandCisco
ModelMCS-7825-H3-IPC1
CategorySoftware
LanguageEnglish

Related product manuals