EasyManuals Logo

Cisco MCS-7825-H3-IPC1 User Manual

Cisco MCS-7825-H3-IPC1
974 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #322 background imageLoading...
Page #322 background image
6-88
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Critical-Level Alarms
LogPartitionHighWaterMarkExceeded
The percentage of used disk space in the log partition has exceeded the configured high water mark.
Some of the core file and / or trace files will be purged until the percentage of used disk space in the log
partition gets below the configured low water mark.
Facility/Sub-Facility
CCM_TCT-LPMTCT
Cisco Unified Serviceability Alarm Definition Catalog
System/LpmTct
Severity
Critical
Parameters
UsedDiskSpace [String] MessageString [Optional]. [String]
Recommended Action
Login into RTMT and check the configured threshold value for LogPartitionHighWaterMarkExceeded
alert in Alert Central. If the configured value is set to a lower than the default threshold value
unintentionally, change the value to default.
If you continue to receive this alert for half an hour after receiving the 1st alert, check for the disk usage
for Common partition under "Disk Usage" tab in RTMT. If the disk usage shown under that tab is higher
than configured value in LogPartitionLowWaterMarkExceeded alert configuration, contact Cisco TAC
to troubleshoot the cause of high disk usage in Common partition.
MaxCallsReached
The maximum number of simultaneous connections in a Cisco Unified Communications Manager
(Unified CM) node has been reached. This is an internally-set value and when it is exceeded, Unified
CM starts throttling calls to keep the number of calls below the internal threshold.
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
History
Cisco Unified Communications
Release Action
8.0(1) Severity changed from Error to Critical.
History
Cisco Unified Communications
Release Action
8.0(1) Severity changed from Error to Critical.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco MCS-7825-H3-IPC1 and is the answer not in the manual?

Cisco MCS-7825-H3-IPC1 Specifications

General IconGeneral
BrandCisco
ModelMCS-7825-H3-IPC1
CategorySoftware
LanguageEnglish

Related product manuals