EasyManuals Logo

Cisco MCS-7825-H3-IPC1 User Manual

Cisco MCS-7825-H3-IPC1
974 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #621 background imageLoading...
Page #621 background image
6-387
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Informational-Level Alarms
Severity
Informational (6)
Parameters
Maximum Hold Duration (minutes) [Int]
Originating Device Name(String)
Destination Device Name(String)
Hold start time(UInt)
Hold stop time(UInt)
Calling Party Number(String)
Called Party Number(String)
Recommended Action
If the duration of the hold time is too short, increase the value in the Cisco CallManager service
parameter or disable the maximum duration by setting the Maximum Hold Duration Timer parameter to
zero.
PermissionDenied
An operation could not be completed because the process did not have authority to perform it.
Cisco Unified Serviceability Alarm Definition Catalog
System/Generic
Severity
Informational (6)
Parameters
None
Recommended Action
None
PktCapServiceStarted
Packet capture service started. Packet capture feature has been enabled on the Cisco Unified
Communications Manager server. A Cisco CallManager service parameter, Packet Capture Enable, must
be set to True for packet capture to occur.
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco MCS-7825-H3-IPC1 and is the answer not in the manual?

Cisco MCS-7825-H3-IPC1 Specifications

General IconGeneral
BrandCisco
ModelMCS-7825-H3-IPC1
CategorySoftware
LanguageEnglish

Related product manuals