2-14
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 2 New and Changed Information
Cisco Unified Communications Manager, Release 8.5(1)
The following HP Server Models are supported for this release:
• MCS-7816-H3-IPC1
• MCS-7825-H2-IPC1
• MCS-7825-H3-IPC1
• MCS-7825-H4-IPC1
• MCS-7828-H3-IPC1
• MCS-7835-H2-IPC1
• MCS-7835-H2-IPC2
• MCS-7845-H2-IPC1
• MCS-7845-H2-IPC2
• DL380G6 SW only
The following Cisco Unified Computing Systems are supported for this release:
• UCS B200 M1
• UCS C210 M1
For information on inapplicable MIBs for 8.5(1) release, refer Vendor-Specific Management
Information Base, page 9-1.
Serviceability - Session Manager Edition (SME)
The Cisco Unified Communications Manager captures and logs all SIP message activities, which
comprise the incoming and outgoing calls or sessions that pass through the Cisco Unified
Communications Manager. The Cisco Unified Communications Manager stores the messages on a
per-transaction basis in a new Call Log file, which can be downloaded through Cisco Unified Real-Time
Monitoring Tool (RTMT) for post-processing activity.
RTMT users can search or trace the calls based on the following criteria:
• Calling Number/URI
• Called Number/URI
• Start Time
• Duration
RTMT downloads the Call Log file that includes the Start Time and Duration. The tool searches for the
matching calls, lists the matching call records, and provides the SIP message Call Flow Diagram.
Before you Begin
Perform the following task:
• Use the enterprise parameter, Enable Call Trace Log, to enable or disable Call Tracing. For more
information on configuring enterprise parameters, refer to the Cisco Unified Communications
Manager Administration Guide.
• The default value for maximum number of Call Trace log files specifies 2000 and the default value
for maximum Call Trace log file size specifies 2 MB.
To Next Page
Loading...
