Cisco MCS-7825-H3-IPC1 - Page 773

7-131
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 7 Cisco Management Information Base
CISCO-CDP-MIB
::= { cdpInterfaceEntry 3 }
cdpInterfaceGroup OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
This object is only relevant to interfaces which are repeater ports on 802.3 repeaters. In this
situation, it indicates the RFC1516 group number of the repeater port which corresponds to this
interface.
::= { cdpInterfaceEntry 4 }
cdpInterfacePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
This object is only relevant to interfaces which are repeater ports on 802.3 repeaters. In this
situation, it indicates the RFC1516 port number of the repeater port which corresponds to this
interface.
::= { cdpInterfaceEntry 5 }
cdpInterfaceExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdpInterfaceExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
This table contains the additional CDP configuration on the device interfaces.
::= { cdpInterface 2 }
cdpInterfaceExtEntry OBJECT-TYPE
SYNTAX CdpInterfaceExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
An entry in the cdpInterfaceExtTable contains the values configured for Extented Trust TLV and
COS (Class of Service) for Untrusted Ports TLV on an interface which supports the sending of these
TLVs.
INDEX { ifIndex }
::= { cdpInterfaceExtTable 1 }
CdpInterfaceExtEntry ::= SEQUENCE {
cdpInterfaceExtendedTrustINTEGER,
cdpInterfaceCosForUntrustedPort Unsigned32