7-133
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 7 Cisco Management Information Base
CISCO-CDP-MIB
cdpCacheIfIndexInteger32,
cdpCacheDeviceIndex Integer32,
cdpCacheAddressType CiscoNetworkProtocol,
cdpCacheAddressCiscoNetworkAddress,
cdpCacheVersionDisplayString,
cdpCacheDeviceIdDisplayString,
cdpCacheDevicePort DisplayString,
cdpCachePlatformDisplayString,
cdpCacheCapabilitiesOCTET STRING,
cdpCacheVTPMgmtDomain DisplayString,
cdpCacheNativeVLAN VlanIndex,
cdpCacheDuplex INTEGER,
cdpCacheApplianceID Unsigned32,
cdpCacheVlanID Unsigned32,
cdpCachePowerConsumptionUnsigned32,
cdpCacheMTUUnsigned32,
cdpCacheSysNameDisplayString,
cdpCacheSysObjectID OBJECT IDENTIFIER,
cdpCachePrimaryMgmtAddrType CiscoNetworkProtocol,
cdpCachePrimaryMgmtAddr CiscoNetworkAddress,
cdpCacheSecondaryMgmtAddrType CiscoNetworkProtocol,
cdpCacheSecondaryMgmtAddr CiscoNetworkAddress,
cdpCachePhysLocationDisplayString,
cdpCacheLastChange TimeStamp
}
cdpCacheIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Normally, the ifIndex value of the local interface. For 802.3 repeaters for which the repeater ports
do not have ifIndex values assigned, this value is a unique value for the port, and greater than any
ifIndex value supported by the repeater; the specific port number in this case, is given by the
corresponding value of cdpInterfacePort.
::= { cdpCacheEntry 1 }
cdpCacheDeviceIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
To Next Page
Loading...
Need help?
General