7-134
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 7 Cisco Management Information Base
CISCO-CDP-MIB
STATUS current
DESCRIPTION
A unique value for each device from which CDP messages are being received.
::= { cdpCacheEntry 2 }
cdpCacheAddressType OBJECT-TYPE
SYNTAX CiscoNetworkProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
An indication of the type of address contained in the corresponding instance of cdpCacheAddress.
::= { cdpCacheEntry 3 }
cdpCacheAddress OBJECT-TYPE
SYNTAX CiscoNetworkAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The (first) network-layer address of the device's SNMP-agent as reported in the Address TLV of the
most recently received CDP message. For example, if the corresponding instance of
cacheAddressType had the value 'ip(1)', then this object would be an IP-address.
::= { cdpCacheEntry 4 }
cdpCacheVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION The Version string as reported in the most recent CDP message. The zero-length
string indicates no Version field (TLV) was reported in the most recent CDP message.
::= { cdpCacheEntry 5 }
cdpCacheDeviceId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The Device-ID string as reported in the most recent CDP message. The zero-length string indicates
no Device-ID field (TLV) was reported in the most recent CDP message.
::= { cdpCacheEntry 6 }
cdpCacheDevicePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
To Next Page
Loading...
Need help?
General