VCA Alarm
110 ClareVision Plus Network Video Recorder User Manual
To configure vehicle detection:
1. Browse to the VCA settings interface.
Menu > Camera > VCA
2. Select the desired camera.
Note: Click the Save VCA Picture to save captures pictures from VCA
detection.
3. Set the VCA detection to Vehicle Detection, and then select the Enable
checkbox.
4. Click to configure the trigger channel, arming schedule, and linkage
actions for the blacklist, whitelist the others.
5. Click Rule Settings to enter the rule settings interface. Configure the lane,
upload picture and overlay content settings. Select up to 4 lanes.
To Next Page
Loading...
