Record and Capture Settings
ClareVision Plus Network Video Recorder User Manual 71
Note: In the File Management interface, click to set the file to unprotected.
Clicking , sets the file to protected.
To protect file by setting HDD property to Read-only:
1. Browse to the HDD setting interface.
Menu > HDD
2. Click to edit the protected HDD.
Note: To edit HDD property, you must set the storage mode of the HDD to
Group. See “Managing the HDD group” on page 156.
3. Set the HDD property to Read-only.
4. Click OK to save the settings and return to the previous menu.
Notes
• You cannot save files in a read-only HDD. If you want to save files in the
HDD, change the property to R/W.
• If there is only one HDD and it is set to read-only, the NVR cannot record any
files. Only live view mode is available.
• If you set the HDD to read-only when the NVR is saving files, the file is saved
in next R/W HDD. If there is only one HDD, the recording is stopped.
To Next Page
Loading...
