CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Appendix E MN/CDM570L.IOM
E–10
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
Header
Compression
Refresh rate – All
Others
HRA= 3 bytes Command or Query.
Header compression refresh rate, 1 to 600
Resolution=1 packet
Refresh rate for all other streams.
Example: HRU =50
Restrictions: 570 only
HRA =
(see description of
arguments)
Payload
Compression
Refresh rate
PRA= 3 bytes Command or Query.
Payload compression refresh rate, 1 to 600
Resolution=1 packet
Refresh rate for all other streams.
Example: PRU =50
Restrictions: 570 only
PRA =
(see description of
arguments)
Telnet timeout TET= 2 bytes Command or Query.
Telnet log in timeout, 1 to 60
Resolution=1 minute
Inactivity timeout on CLI menu screen.
Example: <1/TET=50
TET =
(see description of
arguments)
DU=
11 bytes
No spaces allowed.
Command or Query.
Change the administrator username, where:
Example: ADU=comtech
To get the new user name effective, ADP must be issued
Immediately after ADU. Then query ADU? to see the new.
DU =xxxxxxxxxxx
(see description of
arguments)
DP=
11 bytes
No spaces allowed.
Command or Query.
Change the administrator password, where:
Example: ADP=comtech
DP =xxxxxxxxxxx
(see description of
arguments)
ReadWrite
UserName
RWU=
11 bytes
No spaces allowed.
Command or Query.
Change the ReadWrite username, where:
Example: RWU =comtech
To get the new user name effective, RWP must be issued
Immediately after RWU.
RWU =
RWU
=xxxxxxxxxxx
(see description of
arguments)
ReadWrite
Password
RWP=
11 bytes
No spaces allowed.
Command or Query.
Change the ReadWrite password, where:
Example: RWP =comtech
RWP =
RWP =xxxxxxxxxxx
(see description of
arguments)
To Next Page
Loading...
