Comtech EF Data CDM-570 - Page 397

CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Appendix E MN/CDM570L.IOM
E–11
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
ReadOnly
UserName
ROU= 11 bytes
No spaces allowed.
Command or Query.
Change the ReadOnly username, where:
Example: ROU =comtech
To get the new user name effective, ROP must be issued
Immediately after ROU.
ROU =
ROU!
ROU?
ROU =xxxxxxxxxx
(see description of
arguments)
ReadOnly
Password
ROP= 11 bytes
No spaces allowed.
Command or Query.
Change the ReadOnly password, where:
Example: ROP =comtech
ROP =
ROP!
ROP?
ROP =xxxxxxxxxxx
(see description of
arguments)
A
ccess Client List
A
CL= 18 bytes,
numerical
Command or Query.
Used to set the Access list entry, which contains a subnet and mask. Once the
access list is enabled, only devices from the allowed ranges are allowed to
communicate with the modem.:
xxx.xxx.xxx.xxx/yy, where:
xxx.xxx.xxx.xxx is the IP address, and
yy is the network prefix (0-31)
Returns 000.000.000.000/32 when a particular Access Client is not configured.
Example: <1/ACL[1]=010.006.030.001.24
A
CL =
ACL!
A
CL?
A
CL=
xxx.xxx.xxx.xxx.yy
(see description of
arguments)
A
ccess List Delete
A
CD=x 1-byte numerical
1…4
Command only.
Delete the specified access list entry from the access list table.
<1/ACD=x, where x is value of 1…4
A
CD=
ACD!
N/
A
A
CD=x [1..4]
(see description of
arguments)
IGMP
enable/disable
IGE= 1 byte, value of 0 or
1
Command or Query, where:
0=Disabled
1= Enabled
Enables or disables the IGMP feature.
IGE =
IGE!
IGE?
IGE =x
(see description of
arguments)
A
ccess List
Enforcement
A
CE= 1 byte, value of 0 or
1
Command or Query, where:
0=Disabled
1= Enabled
Enables or disabled access list enforcement.
A
CE =
ACE!
A
CE?
A
CE =x
(see description of
arguments)
Ping Reply Enabled PRE= 1 byte, value of 0 or
1
Command or Query, where:
0=Disabled
1= Enabled
Enables or disables ping reply. When disabled, the modem will not respond to
pings (network security feature)
PRE =
PRE!
PRE?
PRE =x
(see description of
arguments)