CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Appendix K MN/CDM570L.IOM
K–19
(ODU: Enable) KST CONFIG: KST MISC Æ AGC
AGC MODE:
Off On Burst (◄ ►,ENT)
Use the ◄ ► arrow keys to select OFF, ON or BURST, and then press ENTER.
(ODU: Enable) KST CONFIG: KST MISC Æ Ref-Adjust
Internal Ref Adjustment:
087 (▲ ▼,ENT)
To edit the INT 10MHz REF setting: Use the ▲ ▼ arrow keys to select a value – the
values scroll from 000 to 255 – then press ENTER.
The INT REF is adjusted in the factory to be very accurate with the
default setting of 028. This parameter is made available to
compensate for the long-term frequency drift of the oscillator.
To Next Page
Loading...
