ESAB Cutting Systems
CROSSBOW Page 64
Jog torch right (+X）
Jog torch left (-X）
Jog torch forward (+Y）
Jog torch backward (-Y）
Increase speed (Feed Rate). The Speed Override Percentage is
increased with every press.
Reduce speed (Feed Rate). The Speed Override Percentage is
reduced with every press.
The CUTOXY and OFF keys can be used to manually open and close
the Cutting Oxygen solenoid valve
The PIERCE key can be used to start a Pierce Cycle then continue
cutting in the Auto Mode. Motion begins after the appropriate timer
runs.
These other process keys are not used on the Crossbow.
Insert function in the Edit mode.
Delete function in the Edit mode.
To Next Page
Loading...
