11 Setups
280
Setups
11
Border Erase - Left & Right
Set the default value for the amount of border erased from the original in the left and
right directions in [Border Erase] in the [Scan Options] screen. Set the value from 0 to
50 mm in 1-mm steps.
Center Erase
Set the default value for the center erase amount of the original in [Border Erase] in the
[Scan Options] screen.
Set the value from 0 to 50 mm in 1-mm steps.
Margin Shift - Side 1
Set the default value for [Margin Shift] > [Side 1] in the [Scan Options] screen.
Margin Shift - Side 2
Set the default value for [Margin Shift] > [Side 2] in the [Scan Options] screen.
Image Rotation
Set the default value for [Image Rotation] in the [Scan Options] screen.
Image Rotation Direction
Set the default value for [Image Rotation Direction] when [Image Rotation] in the [Scan
Options] screen is set to [Always On] or [On during Auto].
The [Auto] item can be selected when the finisher is installed.
Note • When the finisher is installed, [Auto] is the default value.
Original Orientation
Set the default value for [Original Orientation] in the [Scan Options] screen.
Output Destination
Set the default value for copy or print destination.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
Annotation - Stamp Position
Set the default value for [Position] displayed when [Annotation] > [Stamp] is selected
in the [Output Format] screen.
Annotation - Stamp Color
Set the default value for [Color] displayed when [Annotation] > [Stamp] is selected in
the [Output Format] screen.
Annotation - Date Position
Set the default value for [Position] displayed when [Annotation] > [Date] is selected in
the [Output Format] screen.
Annotation - Page Number - Style
Set the default value for [Style] displayed when [Annotation] > [Page Number] is
selected in the [Output Format] screen.
To Next Page