Fuji Xerox Document Centre C360 - Page 281

Copy Mode Settings
279
Setups
11
Color Saturation
Set the default value for [Sharpness/Color Saturation] > [Saturation] in the [Image
Quality] screen.
Auto Exposure
Set the default value for [Auto Exposure] in the [Image Quality] screen.
[Auto Exposure] is valid when [Original Type] is set to [Text & Photo], [Text], or [Map].
Color Balance - Yellow
Set the default value for the [Color Balance] density levels in the [Image Quality]
screen.
You can set each of the [Low Density], [Medium Density], and [High Density] values for
yellow.
Color Balance - Magenta
Set the default value for the [Color Balance] density levels in the [Image Quality]
screen.
You can set each of the [Low Density], [Medium Density], and [High Density] values for
magenta.
Color Balance - Cyan
Set the default value for the [Color Balance] density levels in the [Image Quality]
screen.
You can set each of the [Low Density], [Medium Density], and [High Density] values for
cyan.
Color Balance - Black
Set the default value for the [Color Balance] density levels in the [Image Quality]
screen.
You can set each of the [Low Density], [Medium Density], and [High Density] values for
black.
Color Shift
Set the default value for [Color Shift] in the [Image Quality] screen.
2 Sided
Set the default value for [2 Sided] in the [Scan Options] screen.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
Mixed Size Originals
Set the default value for [Mixed Size Originals] in the [Scan Options] screen.
Border Erase - Top & Bottom
Set the default value for the amount of border erased from the original in the top and
bottom directions in [Border Erase] in the [Scan Options] screen. Set the value from 0
to 50 mm in 1-mm steps.