Fuji Xerox Document Centre C360 - Page 341

Setup Menu
339
Setups
11
iFax Profile
Set the profile format of the iFax profile.
Here, profile refers to the a specification controlling attributes such as image resolution
and paper size when two iFax supporting machines are communicating.
TIFF-S
This is the iFax standard. Originals larger than A4 size are automatically reduced to A4
size for transmission.
TIFF-F
Select this to specify ultra-high image quality for transmitting image quality, or for
sending A3 size, or B4 size originals.
TIFF-J
Send this when sending originals with JBIG.
Last Name
Enter the recipient's family name, as up to 32 characters.
For information about entering text, refer to "Entering Text" (P.252).
First Name
Enter the recipient's given name, as up to 32 characters.
For information about entering text, refer to "Entering Text" (P.252).
Custom Item 1
The attribute name set as [Custom Item 1 <attribute name>] is shown as the item
name.
You can input any information as an auxiliary item. You can input up to 20 characters.
This is appropriate for information represented by a shortish character string, such as
telephone number, employee number, and so on.
For more about attribute name, refer to "Attribute Name of Custom Items 1 to 3" (P.317).
Custom Item 2
The attribute name set as [Custom Item 2 <attribute name>] is shown as the item
name.
You can input any information as an auxiliary item. You can input up to 40 characters.
This is appropriate for information represented by a longer character string, such as
company location or division and so on.
For more about attribute name, refer to "Attribute Name of Custom Items 1 to 3" (P.317).
Custom Item 3
The attribute name set as [Custom Item 3 <attribute name>] is shown as the item
name.
You can input any information as an auxiliary item. You can input up to 60 characters.
This is appropriate for information represented by a longer character string, such as
company division or address and so on.
For more about attribute name, refer to "Attribute Name of Custom Items 1 to 3" (P.317).
Transfer Protocol
Set the forwarding destination protocol. You can select from [FTP] and [SMB].