Fujitsu PRIMERGY RX2540 M1 - Page 34

34 Upgrade and Maintenance Manual RX2540 M1
Before you start
Hexagonal cross
SW5
0.4 Nm
Slot bracket
to controller
board
M3 x 3.5 mm
C26192-Y10-
C151
Phillips
PH0 / (+) No. 0
0.06 Nm
UFM nylon
screw
M3 x 4.5 mm
(white)
A3C40109082
Phillips
PH2 / (+) No. 2
0.6 Nm
USB 3.0 PCI
card D3305
M3 x 5 mm
(silver)
(contained in card
kit S26361-D3305-
A10)
Philips
PH1
0.4 Nm
TFM M2.5 x 4 mm
(silver)
Countersink
screw cross H
0.4 Nm
ODD (3.5-
inch HDD
version)
M2 x 3 mm (silver)
C26192-Y10-C112
Philips
PH1
0.2 Nm
Front panel
on rack
mounting
bracket (3.5-
inch HDD
version)
C26192-Y10-
C174
Screw driver /
Bit insert /
torque
Screw Usage Type
Table 2: List of required tools and used screws