Fujitsu PRIMERGY TX2550 M5 - Page 300

Removing a non-hot-plug HDD/SSD
Figure 184: Removing the non-hot-plug HDD/SSD 1
▶
Remove the four screws (two screws on each side, circles show one side).
▶
Remove the non-hot-plug HDD/SSD 1 from the non-hot-plug cage.
▶
If applicable, remove the non-hot-plug HDD/SSD 2 in the same way
.
Hard disk drive (HDD) / solid state disk (SSD)
300 Upgrade and Maintenance Manual TX2550 M5