Fujitsu PRIMERGY TX2550 M5 - Page 462

▶
"Removing the system air duct" on page 67
.
▶
"Removing the PCI air duct" on page 88.
▶
If applicable, "Removing the riser module" on page 86.
▶
If applicable, remove the expansion card, see "Removing an expansion
card" on page 358.
▶
Remove the fan bridge, see "Handling the fan bridge" on page 92.
▶
If applicable, "Removing the 4x 3.5-inch HDD extension box" on page 281.
Removing the defective ultraslim ODD
▶
Remove the ultraslim ODD adapter, see "Removing an accessible drive" on
page 441.
▶
Remove the ultraslim ODD, see "Removing the ultraslim ODD from the
ultraslim ODD adapter" on page 459.
Installing the new ultraslim ODD
▶
Install the ultraslim ODD, see "Installing the ultraslim ODD in the ultraslim
ODD adapter" on page 455.
▶
Install the ultraslim ODD adapter, see "Installing an accessible drive" on
page 435.
Concluding steps
▶
If applicable, install the expansion card, see "Installing an expansion card"
on page 346.
▶
Install the fan bridge, see "Handling the fan bridge" on page 92.
▶
If applicable, "Installing the riser module" on page 87.
▶
"Installing the PCI air duct" on page 89.
▶
"Installing the system air duct" on page 68.
▶
"Reassembling" on page 68.
▶
"Connecting the power cord" on page 82.
▶
"Switching on the server" on page 83.
Accessible drives
462 Upgrade and Maintenance Manual TX2550 M5