2. Select Save or Save As.
3. Select Print Job and print the selected images.
The number of copies are automatically distributed according to the parameters dened in Dene
double-sided job on page 100 (number of rows, column, centered). .
●
At the end of each row a black registration line is printed automatically (a). This registration line is
used while printing side B, to position the side B rows and minimize the registration errors.
●
It is recommended to mark with a marker the back side of the last registration line (b) to position
the substrate during the side B loading process.
●
When side A has been printed, after the last continuous black registration line, the printer
automatically provides an area in which to perform the side B calibration (c) and side B loading (d)
area.
ENWW Image composition 105
To Next Page
Loading...
